H3C交换机端口镜像

H3C S5500交换机端口镜像配置命令
https://www.h3c.com/cn/d_200712/326488_30005_0.htm

本地镜像
```
# 创建本地镜像组1。
<Sysname> system-view
[Sysname] mirroring-group 1 local

# 为已存在的镜像组1添加源端口。
<Sysname> system-view
[Sysname] mirroring-group 1 mirroring-port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/5 both

# 从镜像组1中删除某些源端口。
[Sysname] undo mirroring-group 1 mirroring-port GigabitEthernet 1/0/1 to GigabitEthernet 1/0/3 both

# 为镜像组1添加目的端口GigabitEthernet 1/0/1。
<Sysname> system-vie
[Sysname] mirroring-group 1 monitor-port GigabitEthernet 1/0/1

# 显示所有镜像组的信息。
<Sysname> display mirroring-group all
```

远程目的镜像组(未验证)
```
# 创建远程目的镜像组2。
<Sysname> system-view
[Sysname] mirroring-group 2 remote-destination

# 在以太网端口视图下为远程源镜像组2配置出端口GigabitEthernet 1/0/2。

<Sysname> system-view
[Sysname] mirroring-group 2 remote-source
[Sysname] interface GigabitEthernet 1/0/2
[Sysname-GigabitEthernet1/0/2] mirroring-group 2 monitor-egress

# 为远程源镜像组1配置远程镜像VLAN 2。
<Sysname> system-view
[Sysname] mirroring-group 1 remote-source
[Sysname] mirroring-group 1 remote-probe vlan 2

# 把端口GigabitEthernet 1/0/1加入到已创建的远程源镜像组2中。
<Sysname> system-view
[Sysname] mirroring-group 2 remote-source
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mirroring-group 2 mirroring-port both

```