Aruba无线控制器

开局配置，设置ip，达到远程调试条件

注意：只有保存后命令才会生效, `write memory`
```
Auto-provisioning is in progress. It requires DHCP and Activate servers
Choose one of the following options to override or debug auto-provisioning...
 'enable-debug' : Enable auto-provisioning debug logs
 'disable-debug' : Disable auto-provisioning debug logs
 'mini-setup' : Start mini setup dialog. Provides minimal customization and requires DHCP server
 'full-setup' : Start full setup dialog. Provides full customization
 'static-activate' : Provides customization for static or PPPOE ip assignment. Uses activate for master information
Enter Option (partial string is acceptable): full-setup
Are you sure that you want to stop auto-provisioning and start full setup dialog? (yes/no): yes
Enter System name [ArubaVMC_DD_2F_00]:          输入设备名称 
Enter Switch Role (standalone|md) [md]: standalone
Enter Uplink Vlan ID [1]:              vlan号
Enter Uplink port [GE 0/0/0]:            AC连接核心交换机的端口号
Enter Uplink port mode (access|trunk) [access]: trunk            
Enter Native VLAN ID [1]: 
Enter Uplink Vlan Static IP address [172.16.0.254]:                  输入AC管理地址
Enter Uplink Vlan Static IP netmask [255.255.255.0]:               输入AC管理地址掩码
Enter IP default gateway [none]:                                               输入AC管理地址网关地址

Do you wish to configure IPV6 address on vlan (yes|no) [yes]: no
Enter Country code (ISO-3166), <ctrl-I> for supported list: cn
You have chosen Country code CN for China (yes|no)?: yes
Enter the controller's IANA Time zone [America/Los_Angeles]: Asia/Shanghai
Enter Time in UTC [11:38:10]:                    在现有时间减掉8个小时，如果现有时间是18：38：30，那就输入10：38：30
Enter Date (MM/DD/YYYY) [3/19/2020]: 
Enter Password for admin login (up to 32 chars):                   输入ac的admin账户的密码
Re-type Password for admin login:                                         再次输入ac的admin账户的密码
```